Skip to content. | Skip to navigation

Personal tools


You are here: Home / Wiki / Install / Fs-Emusoft.Html


Installing the Emulab File Server

Emulab Installation Documentation

Installing the Emulab File Server

  • Prev

    Installing FreeBSD on fs

  • Next

    Installing FreeBSD on ops

  • Home

Installing Emulab software

Step 1 - Installing packages

To make sure that you're running with versions of software from the ports collection that are known to work with our software, and to save you hours of compile time, we provide pre-built binary packages of the ports required by Emulab.

If you haven't already, download the Emulab Server Package (you can use the FreeBSD 'fetch' command to download the file.)

Unpack this someplace (you need about 550MB of space, so don't use /tmp unless it is large enough). Let's say you unpacked it to /var/tmp. You would then run:

# force install of pkg
pkg info

pkg add /var/tmp/packages/emulab-fs-6.0.txz

# currently, the fs package does not include git, so install manually
pkg add /var/tmp/packages/git-

Of course, if you unpacked it somewhere else, put in the correct path.

We provide all of the binary packages necessary to build ops/fs/boss in our packages tarball. You may wish to install more packages built from source via the ports tree, but if not, there is no need to install the /usr/ports tree.

We have run into many, many problems with clashes between versions of the FreeBSD ports. So, rather than using the /usr/ports tree that comes on the FreeBSD installation media, we use one that we've tested against. If you haven't already, obtain a copy of our 'approved' ports collection. The package is about 66MB; it unpacks to 900MB. Unpack it to a place such as /usr/ports (if it exists, rename the old directory to ports.old, or just remove it), and install whichever ports you want to make fs feel like 'home' (such as emacs, jove, or whatever).

Step 2 - Unpacking and running 'configure'

At this point, you should already have made your definitions file. If not, refer to Creating the Definitions File. You will use this same file on boss, ops, and fs. You should also have the the Emulab source tree available.

Download the Emulab source tree from the emulab-stable git repository and then run its configure script, providing the path of your definitions file:

git clone git:// /usr/testbed/src/testbed
mkdir -p /usr/testbed/obj/testbed
cd /usr/testbed/obj/testbed
/usr/testbed/src/testbed/configure --with-TBDEFS=/path/to/your/defs-file

Typically, you would store your defs file in the source tree along with the other defs files that came in the package.

Step 3 - Running the fs installation script

In the object tree you've configured (say, /usr/testbed/obj/testbed), there's an 'install' subdirectory with a script called 'emulab-install'. Just run this script as root (note the same package directory argument as above):

cd install
perl emulab-install -p /var/tmp/packages fs

This will take care of installing any additional ports, and doing various other configuration of FreeBSD required to make it into an fs node. The script is designed so that you can run it as many times as you want, and it will skip steps that it's already done. If it fails, send the output to Utah so that we can fix it up. If it succeeds, follow any other instructions it may have. The script will tell you to reboot the machine, but you may wait until after the next step to do so, if you want.

(You may have to set the executable bit on this script, since configure won't; we'd like to get this fixed at some point.)

You should be aware that, among other things, this script sets up sendmail, and sets up password-less 'sudo' for anyone in the 'wheel' group. If you don't want these for security reasons, you can undo them after the installation script has completed.

Step 4 - Installing Emulab software from source

To install the actual testbed software, simply run the following from your object directory:

gmake fs-install



If you're logged in as root, /usr/local/bin, where gmake resides on FreeBSD, may not be in your path. If not, include the full path to gmake in the above command.

  • Prev

    Installing FreeBSD on fs

  • Next

    Installing FreeBSD on ops

  • Home